MDPro

MDPro M7 Touchscreen 3D Bladder Scanner with Drop-Resistant Probe and Cart

SKU:
MDPRO-M7-BLADDER-SCANNER
(0) Write a Review

Product Details

Brand/Manufacturer MDPro
SKU MDPRO-M7-BLADDER-SCANNER
Need assistance?
Get in touch

The MDPro M7 Bladder Scanner is an advanced, portable ultrasound system designed for fast, noninvasive urinary bladder volume measurement and post-void residual (PVR) assessment. Featuring a 10.3-inch color TFT-LCD display, 3D scanning technology, and a durable probe with 128 sensors, the M7 provides healthcare professionals with a convenient and accurate solution for routine bladder assessments.

With a 0–2,000 mL measurement range, ±5% accuracy for volumes of 100 mL or greater, and scan times of three seconds or less, the M7 helps clinicians quickly assess bladder volume, evaluate urinary retention, and support catheterization decisions.

Designed for primary care, long-term care, hospitals, rehabilitation facilities, and other clinical environments, the M7 combines intelligent scanning guidance, patient history management, and battery-powered portability to streamline bedside bladder assessments.

Key Features

  • Noninvasive 3D bladder volume measurement
  • 10.3-inch color TFT-LCD display
  • 128-sensor ultrasound probe
  • 0–2,000 mL bladder volume measurement range
  • ±5% accuracy for volumes ≥100 mL
  • ±5 mL accuracy for volumes below 100 mL
  • Rapid scanning in three seconds or less
  • Durable, impact-resistant probe
  • Easy and Expert scanning modes
  • Automatic patient type selection
  • Prescan guidance for probe positioning
  • Three adjustable scanning depths: 160, 180, and 200 mm
  • On-screen quick guide and step-by-step instructions
  • Patient identification support for up to 18 digits
  • Storage for up to 10,000 patient cases
  • Patient history search and review
  • Wireless report printing capabilities
  • Optional Bluetooth thermal printer
  • Rechargeable battery operation
  • No annual calibration required
  • Medical rolling cart and travel case listed in the manufacturer package

Noninvasive Bladder Volume Measurement

The MDPro M7 uses ultrasound technology to estimate urinary bladder volume without requiring catheter insertion.

During an examination, the clinician positions the ultrasound probe against the patient's lower abdomen. The system captures ultrasound data and calculates the estimated bladder volume.

This noninvasive method provides information that can help clinicians evaluate urinary retention, incomplete bladder emptying, and bladder management needs.

When used with appropriate clinical protocols, bladder scanning may help reduce unnecessary catheterization and improve patient comfort.

Advanced 3D Scanning Technology

The M7 incorporates three-dimensional ultrasound scanning technology with 128 sensors in its probe.

Its scanning system combines mechanical and electronic technologies to support efficient bladder volume measurement.

Key imaging capabilities include:

  • 3D ultrasound scanning
  • 128-sensor probe design
  • Automatic volume calculation
  • Prescan positioning guidance
  • Adjustable scanning depths
  • Wide-angle scanning coverage

These features support bladder visualization and help clinicians obtain consistent measurements across different patient anatomies.

Large 10.3-Inch Color Display

The M7 features a 10.3-inch color TFT-LCD display for convenient viewing of bladder scanning information.

The large screen provides ample space for reviewing ultrasound images, bladder volume measurements, patient information, and examination history.

An integrated quick guide and step-by-step instructions help users navigate routine scanning procedures.

Rapid Scanning in Three Seconds or Less

The MDPro M7 is designed to provide bladder volume measurements in three seconds or less.

Rapid scanning supports efficient patient assessments, particularly in environments where multiple examinations or repeated bladder volume checks are required.

Precision Bladder Volume Measurement

The M7 provides a measurement range of 0–2,000 mL, accommodating a broad range of bladder volumes.

Published specifications identify:

  • ±5% accuracy for measured volumes of 100 mL or greater
  • ±5 mL accuracy for measured volumes below 100 mL

These specifications help make the M7 suitable for routine bladder volume assessment and PVR monitoring.

Three Adjustable Scanning Depths

The M7 offers three scanning depth settings:

  • 160 mm
  • 180 mm
  • 200 mm

Adjustable scanning depths allow clinicians to select an appropriate setting based on patient anatomy and examination requirements.

This flexibility helps support bladder scanning across a variety of patient populations.

Automatic Patient Type Selection

The M7 includes automatic patient type selection to simplify examination setup.

This function helps configure scanning parameters for the selected patient profile, reducing the need for manual adjustments during routine assessments.

Prescan Positioning Guidance

The M7 incorporates expanded prescan guidance to assist with probe positioning.

Visual guidance and on-screen instructions help users locate the bladder and optimize transducer placement before completing a measurement.

This can support more consistent examinations and simplify training for clinicians who are new to bladder scanning.

Easy and Expert Scanning Modes

The MDPro M7 includes two operating modes.

Easy Mode provides a simplified interface for routine bladder volume measurements.

Expert Mode offers additional scanning information for users who prefer greater control and image visualization during an examination.

These modes allow facilities to accommodate different operator preferences and experience levels.

Durable, Impact-Resistant Probe

The M7 features a rugged ultrasound probe designed for use in demanding clinical environments.

Its impact-resistant construction helps protect the probe during routine handling and movement between patient-care locations.

This design is particularly useful for shared equipment programs and busy healthcare facilities.

Post-Void Residual Assessment

The M7 supports post-void residual (PVR) measurement, allowing clinicians to estimate the amount of urine remaining in the bladder after urination.

PVR measurements can assist with evaluating:

  • Urinary retention
  • Incomplete bladder emptying
  • Postoperative urinary function
  • Ongoing bladder management needs
  • Patients with impaired spontaneous urination

The M7 provides a noninvasive method for obtaining bladder volume information as part of a broader clinical assessment.

Supports Catheterization Decisions

Bladder volume measurements can help clinicians determine whether catheterization may be appropriate under established clinical protocols.

The M7 provides rapid bladder volume estimates that may help reduce unnecessary catheterization procedures.

Clinical decisions should consider patient symptoms, medical history, examination findings, and facility guidelines rather than bladder volume alone.

Storage for Up to 10,000 Cases

The MDPro M7 supports storage for up to 10,000 patient cases.

This capacity allows facilities to retain a substantial number of bladder scan examinations for documentation and later review.

The scanner also supports patient identification numbers of up to 18 digits.

Patient History Search

The M7 allows users to search for patients by name and review previously stored examination results.

This helps clinicians access historical bladder volume measurements and monitor changes over time.

Patient history functionality can be particularly valuable in long-term care and rehabilitation settings where repeated assessments are common.

Wireless Report Printing

The M7 supports wireless printing of bladder scanning reports using compatible printing equipment.

Clinicians can print examination results for patient records and clinical documentation.

An optional Bluetooth thermal printer is available for facilities requiring dedicated portable printing capabilities.

Printer compatibility and wireless setup requirements should be confirmed for the selected configuration.

Rechargeable Battery Operation

The M7 operates using rechargeable battery power, with a DC charging option.

Battery-powered operation supports flexible placement and movement between patient-care areas without requiring a continuous wall-power connection.

Actual battery runtime depends on the installed battery, operating conditions, and scanning frequency.

No Annual Calibration Required

The M7 is advertised as requiring no annual calibration.

This can help reduce routine maintenance requirements and simplify ongoing equipment management.

Facilities should continue to follow manufacturer instructions for cleaning, inspection, battery maintenance, and performance checks.

Large touchscreen display with on-screen quick guide and step-by-step instructions Wired 3D probe, drop resistant up to 4 feet Three selectable scanning depths (160, 180, and 200 mm) for different patient sizes Volume accuracy of +/-5% above 100 ml and +/-5 ml below 100 ml WiFi and Bluetooth connectivity for printing to a local printer Rolling cart with locking casters, upper basket, and probe holders included No annual calibration required 5 years total main unit warranty coverage

Product Documentation

Get in the know to get the most value of your solution.

▲